PLUMBING TIPS – FIXING A LEAKY FAUCET

You can’t sleep at night if you keep on hearing a dripping tap. Apart from the constant drip, you also have to worry about wasting water. You’ll want to get help from a plumbing contractor as soon as you hear the dripping sound. Luckily, it’s easy to fix a leaky faucet. Here are some tips to fix a leaky faucet at home:

Compression or Washerless Faucet?

There are two main types of faucets that you will find in your home: cartridge faucets and compression faucets. The process of repairing these faucets is slightly different because they use different components to control water flow. A compression faucet has a rubber washer that holds the valve seat in its place. The washer will wear down as water pressure builds up and forces it against the valve seat.

A washerless faucet, on the other hand, uses a cartridge or ball to replace a rubber washer. It also has a valve seat to regulate the faucet’s water flow. They are more durable than compression faucets but can crack or wear out from normal wear and tear.

Turn off your water

Whatever type of faucet you use, it is important to shut off the water supply valves beneath the sink before you start any faucet repair. To turn the water off, turn both valves clockwise. Once you have done that, open the faucet to let out any water or pressure left in the line. To prevent any essential items from falling into the sink, you will also need to close the drain.

How to fix a washerless faucet

Take out the faucet handle

After the water has been turned off, you can remove the faucet handle. Locate the small set screw at the back or bottom of the handle to do this. Each brand may be different. However, these screws are usually hex screws so you might need an Allen key of the right size to remove them. Once the set screw is removed, lift the handle and take it out. The internal components of your washerless faucet handle might look different depending on which model you have. If you find it difficult to fix a faucet, call a plumber in Myrtle Beach.

How to fix a compression faucet

Take out the faucet handles

Access the inside of the faucet to fix a dripping faucet. Begin by taking out the faucet’s handles. Next, remove the set screws at the back or bottom of the handles. Next, remove the set screws that hold the handle in place with a screwdriver.

Take out the stem

After the handles are removed, locate and remove the stem nut. Use a wrench to loosen the nut.

Take a look at the O-Ring

Next, remove the stem. You should now be able to see the o-rings and seat washer. You can now examine the O-ring. Replace the O-ring if it is cracked or worn.

Change the washer

The seat washer is located at the bottom of your stem. Sometimes the seat washer may be held in place with a screw. It is possible that the washer is held in place by a screw. If this happens, you should remove it first. Simply replace the washer with a new one once it is removed. These parts are very affordable. You should replace the O-rings and washers with the same size as the originals. Even the smallest difference could cause a major leak. Contact Blue Ribbon Plumbing LLC right away if you notice anything odd with your home’s plumbing. This will save you time and money in the long run.

Call Blue Ribbon Plumbing LLC now if you need professional plumbing services near you.

Like our Facebook page for more great info about plumbing services.

Blue Ribbon Plumbing LLC
4201 Carolina Exchange Drive Suite 202
Myrtle Beach, SC 29579
(843) 267-9733
https://www.blueribbonplumbingmb.com/

Serving all of Horry County including Myrtle Beach, North Myrtle Beach, Little River, Murrells Inlet/Garden City, Surfside Beach, Carolina Forest/Forestbrook, Conway/Aynor

TOILET REPAIR – WAYS TO REMOVE A CLOG

Toilet clogs are a problem in modern homes even with good plumbing. Although a toilet refusing to flush can be annoying, it doesn’t have to cause a huge problem or cost you a lot to fix. There are five ways to get the clog out so that you don’t have to think about toilet repair for a long time.

1. The tried and true method: Use a plunger

Although it’s not the most advanced, a plunger is still your best option for a blocked toilet. It is important to choose the right type of plunger for your job. A toilet plunger is better than a sink plunger. These plungers are cylindrical in shape and have a cylindrical sleeve that comes out the bottom. The sleeve is designed to fit into the drain hole in the toilet bowl.

2. Snake It!

Sometimes, plunging is not enough to clear clogged toilets. You may consider using a snake instead. The snake is a long, semi-rigid coil made of wire with a corkscrew tip. There are many toilet snakes available, but the best option is the closet or toilet auger. This is designed to get around the turns of a toilet bowl. Professional plumbers use variants of this tool to get the job done as efficiently as possible.

3. Get the hang of it

You don’t need a snake or an auger, but you can still get the same results by simply unwinding a wire hanger. To act as a hook, you can leave the bend of the hanger unwound. However, you might want to cover it with electrical tape or duct paper to protect the porcelain surface of your toilet. The unwound hook end of the hanger should be pushed down the drain first. Once the clog is cleared, you can work the drain back and forth until it clears. Rubber gloves are a good option to keep your hands clean. However, there is a downside to this method. It could get messy and the results are not always what you would want. Call a Myrtle Beach plumber for more consistent results.

4. Soap up

Chemical methods might be a better option than mechanical methods to remove clogs. This is the easiest way to do it. Simply pour 1/4 cup liquid dish detergent into a bowl. Allow it to sit for 15 minutes, so it can travel through the water. Then rinse the clog with very hot water, just below the boiling point. A plumber would know what to do in tight situations. Usually, a plumbing contractor would bring a set of chemicals to use for unclogging pipes and toilets.

5. Create a Clog-Clearing recipe

You can find more help for clogs in your kitchen with the tried-and-true duo of vinegar and baking soda. This can cause a fizzy reaction so you might want to drain some water from the toilet bowl if it is full to the rim. You may also need to place some towels around the base of the toilet to catch any spillover. Next, add one cup of baking soda to the bowl. Let it work for approximately half an hour. You can then flush the toilet with hot water.

Call Blue Ribbon Plumbing LLC now if you need professional toilet repair and plumbing services.

Like our Facebook page for more great info about plumbing services.

Blue Ribbon Plumbing LLC
4201 Carolina Exchange Drive Suite 202
Myrtle Beach, SC 29579
(843) 267-9733
https://www.blueribbonplumbingmb.com/

Serving all of Horry County including Myrtle Beach, North Myrtle Beach, Little River, Murrells Inlet/Garden City, Surfside Beach, Carolina Forest/Forestbrook, Conway/Aynor

COMMON PLUMBING PROBLEMS EVERY HOMEOWNER NEEDS TO WATCH OUT FOR

Are you tired of hearing your bathroom faucet drip, drip, drip throughout the night? Do you have problems flushing your toilet? Are you having problems with the water pressure in your shower? You will have to deal eventually with plumbing issues if you are a homeowner. You don’t need to panic. There are common plumbing problems that you can handle yourself with the right tools and knowledge.

It’s best to hire a professional plumber if you’re unsure how to solve a problem or if the problem is very serious. You must ensure your safety before you begin any DIY project. You will need to turn off your water supply first for most problems. No matter what the issue, safety goggles or gloves are essential.

These are the common problems that homeowners should look out for when dealing with plumbing.

1. Dripping Faucet

A dripping faucet can lead to water waste, which is the most obvious problem. If a faucet drips once per second, that’s 86.400 drips per day. That’s 15.140 drips per gallon. This is a total of 5.8 gallons of wasted water each day. This is more than 2,000 gallons per year. That’s 8 tons of water going down the drain. These numbers are for a single faucet. The waste quickly multiplies if there are more leaky faucets in the home. Even if your faucet is slow-drip, you are still wasting water.

2. Running Toilet

Running toilets are the worse version of a leaky faucet problem. It can get so bad! A small toilet can waste between 20-30 gallons per day. A medium-sized toilet can waste more water per day, while a running bidet can waste 12 tons of water per month. You should call a plumber if your toilet keeps running despite a few quick handles jiggles.

3. Toilets clogged

It can be frustrating to have a clogged toilet. They can overflow. They are very unpleasant. They leave waste all over the floors. Even worse: They can indicate a more serious problem than you initially thought: septic system damage.

4. Slow Drainage or Blockage

Slow drains are one of the most common problems that people need to call on a professional plumber. These problems can often be caused by the same reasons as clogged toilets. It is not known what debris can clog your pipes. Don’t flush anything down your drain, just like you do with the toilet.

5. Water heater not working

Problems with water heaters might need the attention of a plumber, a natural-gas expert, or an electrician, among other professionals. These are some of the most common problems:

• The water heater floods the surrounding area because the valves are loosening.
• Corrosion and rust affecting water circulation in the tank
• The bacteria invading your tank will make your water smell horrible.
• The most common problem with water heaters is their inability to live up to their name. They either provide too much hot water or not enough.

6. Leaky Pipes

When it comes to calling a plumber, leaky pipes are often the first thing that people think about. You could have a leaky toilet pipe or a leaky pipe under your sink. Leaky pipes such as dripping faucets can cause water waste and damage to your home. Water can cause wood to rot, metal to corrode, and pool up to become breeding grounds for bacteria and insects that transmit diseases.

7. Low water pressure

Even if you aren’t in the shower, low water pressure can be a problem. Low water pressure can also be caused by the utility. A pressure gauge is a good tool to check this. You may also have problems in your home. Sometimes it’s as simple as trying too many things at once. Your shower may not be as great if you also run the dishwasher and water your lawn. You might also have blocked pipes. Check different areas to determine if low pressure is present throughout your home.

8. Breakage or Leakage of Main Water Line

Breaks in the main water line can occur in two ways. The first is the possibility that the public delivery line could be cut. The second possibility is that the water delivery line to your home from the public main could fail. Water main leaks can be just a little less severe, but they still need immediate attention. They can lead to water main breaks if left unattended. They also require digging and heavy equipment. These are the most difficult jobs a plumber will ever have to tackle.

9. Sewer Line Problems

Sewer lines bring water back to you while water mains bring it. Although sewer lines aren’t likely to burst with an Old Faithful geyser, related issues can be quite… unpleasant. Most sewer line problems are simply blockages. A sewer clog can occur if you flush anything down the toilet, even the misleadingly called “flushable wipes”. Even if it isn’t, a professional plumber might still be needed to clear the lines.

10. Expensive Water Bill

There are many reasons why your water bill suddenly increases. One faucet drip can add up to 6 gallons per day. A family of four uses 200 gallons per day. That’s 6,180 gallons instead 6,000 over the course of a month. And that extra 180 Gallons adds up quickly. Weather can have an impact on your bills. Dry weather increases water consumption as you try to keep your lawn healthy. Water usage will increase if there are more people in your home.

11. Downspout Issues

Although fixtures and pipes can cause issues at ground level, faulty downspouts can pose a problem both below ground and above. Water can seep around the foundation if they are disconnected, or the connections become damaged or stressed. This can lead to foundation damage and sweating walls. A wet basement will be caused by sweating walls and water seeping out of the foundation.

12. Water Spots on the Lawn

Standing water and wet spots on your lawn may be either minor or major. Puddles can be caused by minor grading issues. If the grade slopes towards the house, it isn’t dangerous. Leakage or damage to septic systems, leaking mains, or leaking water mains are all major problems. These problems should be addressed immediately to avoid becoming utter disasters.

13. Overflowing Gutters

These and the poor downspouts mentioned above can lead to not only wet spots in your lawn, but also foundational issues. To protect your foundation, you can install drainage tiles to divert water from the house. To ensure that your gutters drain water away from your home, it is important to clear them of any debris or trash. To keep leaves, twigs, and other debris out of their gutters, many people put wire mesh on them.

14. Mildew in the Attic

Although most attics do not have plumbing, some may. Any attic located behind a wall with a clogged gutter or overflowing gutter could be susceptible to mold and mildew. Attics are drier than other areas of the house, so water damage can go unnoticed. This is especially true if there are additional walls. An expert plumber in Myrtle Beach should be called to evaluate the extent of the damage to the attic due to faulty water systems.

What to do in a Plumbing Emergency

First, don’t panic. Try to identify the source of the emergency as soon as possible. Use absorbent materials such as sheets and towels to stop water from escaping and call a professional plumbing contractor. It is crucial to act quickly once an emergency occurs. Don’t delay.

Call Blue Ribbon Plumbing LLC now if you need help with your plumbing system.

Like our Facebook page for more great info about plumbing services.

Blue Ribbon Plumbing LLC
4201 Carolina Exchange Drive Suite 202
Myrtle Beach, SC 29579
(843) 267-9733
https://www.blueribbonplumbingmb.com/

Serving all of Horry County including Myrtle Beach, North Myrtle Beach, Little River, Murrells Inlet/Garden City, Surfside Beach, Carolina Forest/Forestbrook, Conway/Aynor

BUSTING THE MOST COMMON PLUMBING MYTHS

We may never know where it all started but the fact remains that a rumor, whether it is a “she said” or “he said” story can easily make a plumbing misconception a plumbing reality.

Provided below are some of the most common plumbing myths and the reality behind all of them according to professional plumbers.

Water Heater Is About To Explode

You are in your living room just sitting around and relaxing on a quiet evening when suddenly your water heater starts. You hear a loud banging and rumbling sound. A lot of homeowners who encounter this are often afraid, thinking that their water heater will explode.

The reality is that the sound you are hearing is caused by sediment that has accumulated in the tank. It is made of loose minerals, the majority of which is calcium, from hard water. It goes to the spot where the heating element is found and that is at the bottom of the tank. Once the burner is switched on for water heating purposes, the sediment hinders the heat from properly rising and the expansion of the bubbles created is the cause of the noise.

A Leaky Faucet Is Not A Problem

Numerous homeowners consider a leaky faucet as just a drip and do not need fixing. Always remember that leaks are a big deal. It can cause you a lot of cash and negatively affects the environment. The Environmental Protection Agency said that 1 trillion gallons of water are wasted annually because of household leaks. That is equal to the total amount of water used by more than 11 million homes every year.

A single leaky faucet can result in higher water bills as well as water shortages in other parts of the country. Another thing to consider is that a leak can wear out the faucet and stain the fixtures, which means you may have to spend more cash on Myrtle Beach plumbing repairs or plumbing replacements. If you notice any sign of leaks, be sure to have it fixed as soon as you can.

Other Plumbing Lore

Many people believe that ice cubes can sharpen the blades of a garbage disposal unit. This is not true. However, the ice cubes can clean the blades. If you notice that your sink is beginning to smell, you can use ice cubes to get rid of the stench. There are also those who believe that dropping lemon peels down the disposal unit will give it a nice scent. Although this may be true, lemon peels can clog the drain and lead to expensive repairs by a plumbing contractor from Blue Ribbon Plumbing. As an alternative, you can try pouring white vinegar into the drain. It has natural cleansing properties and it will clean up your disposal without having to worry about clogs.

A few homeowners believe that putting a brick at the rear of the toilet tank will help save water. Always remember that bricks deteriorate as time passes by and may cause other problems. Your intention of saving water can backfire and too much water is displaced, therefore, requiring you to flush twice.

Call Blue Ribbon Plumbing LLC if you have plumbing concerns.

Like our Facebook page for more great info about plumbing services.

Blue Ribbon Plumbing LLC
4201 Carolina Exchange Drive Suite 202
Myrtle Beach, SC 29579
(843) 267-9733
https://www.blueribbonplumbingmb.com/

Serving all of Horry County including Myrtle Beach, North Myrtle Beach, Little River, Murrells Inlet/Garden City, Surfside Beach, Carolina Forest/Forestbrook, Conway/Aynor

HOW TO AVOID A HOLIDAY PLUMBING DISASTER

The holidays are the most wonderful time of the year. It allows people to join together and spend time with the ones they love, while meditating on all that they’re thankful for. But if you’re hosting guests, you’ll want to know how to get your home ready for the holidays, including your plumbing system.

While you’ll probably clean your home and fix any nagging household issues, you should consider your home’s plumbing. You might be wondering, “How do I prepare my house for holiday guests?”

When it comes to your plumbing system, there are a few steps you can take, and that’s what this article will cover.

Holiday Plumbing Tips

Test your toilets and drains

Before you have any guests over to your home for the holidays, go around to all the toilets and drains in your home, and make sure that they’re draining correctly. For toilets, try flushing them and watching the water drain and refill; if there’s any sort of hesitation or malfunction, don’t hesitate to call a plumber. For your sinks, run the water for several seconds and see how quickly they drain. If the sink is clogged or draining slowly, have an expert take a look at it.

Enforce a toilet paper-only rule

One of the leading causes of clogged toilets is people flushing items that shouldn’t ever be flushed down the toilet. These include cotton balls, baby wipes, wrappers and feminine hygiene products. Your own family might know not to flush anything other than toilet paper, but your guests may not. You could either tell your guests not to flush anything but toilet paper down the toilet or put a small sign in the bathroom to gently remind them not to send anything down that might cause a clog.

Don’t dump grease down the drain

Whether you’re cooking a Thanksgiving turkey, a Christmas ham, or some other delectable holiday recipe, keep the grease out of your drains. You can do this by saving glass jars and dumping the leftover grease you have from any cooking into said jars. Grease is terrible for your drains because it cools, hardens, and eventually coagulates, creating a barrier layer that doesn’t allow your sink to drain properly.

Buy some extra trash cans

Sometimes people dump or flush materials down the drain because they don’t know where else to put them. Purchasing and placing some extra trash cans in your bathroom and kitchen can help to mitigate this dilemma. Instead of food scraps or toiletry products going down your sink or toilet, they can be safely disposed of in garbage cans.

Invest in a drain screen

Hosting the holidays means you’ll be doing more dishes than usual. One way to prevent a clog in the kitchen sink is to use a drain screen. This small piece of stainless steel can be found at most home improvement stores for under $5 and can be placed in your kitchen sink’s drain. It catches larger food scraps and prevents them from going down the drain. When you’re done with the dishes, you can simply pull out the screen and dump the scraps in the garbage.

Call for your plumbing needs today

Now that you know how to get your home ready for the holidays, you’ll no longer have to wonder, “How do I prepare my house for holiday guests?”

For a plumbing inspection and more, call Blue Ribbon Plumbing LLC now. We offer everything from water heater installation to drain repair.

Like our Facebook page for more great info about plumbing services.

Blue Ribbon Plumbing LLC
4201 Carolina Exchange Drive Suite 202
Myrtle Beach, SC 29579
(843) 267-9733
https://www.blueribbonplumbingmb.com/

Serving all of Horry County including Myrtle Beach, North Myrtle Beach, Little River, Murrells Inlet/Garden City, Surfside Beach, Carolina Forest/Forestbrook, Conway/Aynor

WHY IS MY WATER HEATER LEAKING?

Nobody likes standing in their basement, ankle-deep in cold water as they wonder “why is my water heater leaking?” Or suddenly feeling water dripping on their head from the ceiling while lounging on the couch. The last thing you want is a busted water heater causing water damage to your carpet, photos, comic books, or other valuables.

That’s why we put together this guide, so you can see our top reasons for a water heater leaking – and avoid the dreaded flooded basement fiasco from a water heater burst. Read on for our most common culprits behind a leaking or busted water heater, and how to fix them. How can my water heater leak? Your guide to common causes of a faulty water heater

Water Heater Rust & Sediment Buildup

Water heaters are mostly made from steel. Steel is mostly iron, and yes, you guessed it right, iron rusts. An anode rod is a protection that water heaters use to prevent rusting. However, over time, your anode could wear down and fail, which can cause your heater to leak from its top anode. We recommend that you call a plumber if your hot tap water becomes a gross, rusty brown color.

Hard water runs through most of the water heaters in many homes. Hard water contains small amounts of minerals that can settle in the tank of your heater. This can cause a layer of sediment that prevents water from reaching the burner.

What does this all mean? This means it takes longer for water to heat, which can lead to overheating, general degradation, and most importantly, leaks from your water heater’s base. This problem can be avoided by draining the water and flushing out sediment every year. But if you don’t, you can be expected to face some of the problems listed below.

A Drain Valve Leak

A leaking drain valve could be the reason your water heater is leaking. A flooded basement could occur if the drain valve is damaged. To remove sediment from hot water tanks, drain valves are installed. The leak in your water heater could be caused by a loose valve.

Leakage in an Internal Tank

An internal tank leak is the most common reason your water heater is leaking from its base. Your water heater could be leaking because of internal damage to its tank. It could be that your tank has been contaminated with sediment for a long time. This could lead to corrosion and cracking of the tank shell. To check for serious internal problems, inspect the tank from the outside. In most cases, replacing the water heater will be the only way to fix it.

Air Pressure

When the outside water pressure is too high, or the temperature rises too much, excess air pressure can build up in your water heater’s tank. These problems can be avoided by setting your water heater at 120-125 degrees.

We recommend that you keep an eye on the temperature and pressure relief valve of your water heater, called a temperature control valve. It is located on the tank’s top or side and releases the heater’s tank’s pressure when needed. If the valve does not leak water, it is best to replace it immediately. Tip: Avoid replacing the valve with a plastic one if you can. They are cheap and will soon break again.

Time

Your water heater could also be at risk of aging. Hot water heaters can last between 8 and 10 years. Basic leaks can occur at the end of their useful life. These potential leaks can be caused by corrosion, sediment damage over years, or the inevitable damage of aging.

Call Blue Ribbon Plumbing LLC now if you need help with your water heater or your home’s plumbing system.

Like our Facebook page for more great info about plumbers.

Blue Ribbon Plumbing LLC
4201 Carolina Exchange Drive Suite 202
Myrtle Beach, SC 29579
(843) 267-9733
https://www.blueribbonplumbingmb.com/

Serving all of Horry County including Myrtle Beach, North Myrtle Beach, Little River, Murrells Inlet/Garden City, Surfside Beach, Carolina Forest/Forestbrook, Conway/Aynor

TIPS ON INCREASING WATER HEATER EFFICIENCY

Did you know that heating water can account for nearly 20% of your home’s energy bill? Heating water takes more energy than any other household task. You’ll feel the effects even more if your water heater isn’t working as intended.

Inefficient water heaters perform less than they should and can cost you more each month. This is a losing situation that can only get worse over time. There are some proven ways to increase the efficiency of your water heater. These five easy projects can make your water heater more efficient and help you save money:

Step 1: Drain Water Heater Sediment

Minerals like calcium and magnesium build up over time in your water heater tank. These minerals settle to the bottom of your tank, hardening and forming sediment. The sediment can cause your system to work harder to heat your water. Overworking your water heater can lead to ruptures and overheating. Water heater sediment can be easily removed by draining the tank completely and flushing it with cold water once a year to maximize efficiency.

Eliminating sediments from your heater will make it run more efficiently and help prevent costly repairs. Flushing your water heater can be done easily by anyone with the right tools. It is possible to hire a professional plumber in Myrtle Beach to flush your water heater as part of larger water heater maintenance calls.

Step 2: Insulate water pipes

The heat tends to quickly dissipate, especially in pipes and water tanks. This is normal, but it can also cause your water heater to not heat as efficiently as it should. To compensate for heat loss in your pipes, you will need to heat more water. Your water heater will use more energy if you heat more water. This will result in higher electric bills. Insulating water pipes reduces heat loss and increases efficiency. Insulating your pipes will ensure that heat does not escape from the system. You could also switch to a tankless water heater to skip this step.

Step 3: Use low-flow fixtures

Low-flow plumbing fixtures can be another way to save money over time, and without requiring too much effort or time upfront. Low-flow fixtures reduce water flow so less hot water is wasted. Traditional fixtures can be replaced with Low-flow faucets and shower heads to save up to 50% on your water consumption. These are more expensive upfront, but they will save you money in the long term, especially if your family member is notorious for taking hot, long showers.

Step 4: Set your Water Heater to 120 Degrees Fahrenheit

It’s a fact that every water heater comes with a thermostat built in. The thermostat tells the system how hot it needs to heat water in the tank. Your system’s heat output will determine how hot your water is. The longer your system runs, the more energy it uses. You should change the thermostat setting on your water heater if your hot water becomes too hot or appears dangerously hot. Your water bills will be lower if you turn down the thermostat, preferably 120 degrees Fahrenheit.

Step 5: Fix Plumbing Leaks

Water heater leaks often begin at the heater itself. Check around the tank of your water heater for visible leaks. These leaks could be caused by the temperature-pressure relief valve or drain valve. Temperature-pressure relief valves can leak to release pressure, as intended, or simply because they are faulty. Also, check the water pipes around fixtures such as sinks and showers. For assistance in detecting or fixing plumbing leaks, contact your local plumber.

Call Blue Ribbon Plumbing if you need help with water heater installation, repair, and maintenance. You may also reach out to us for other plumbing needs. Contact us today!

Like our Facebook page for more great info about plumbing services.

Blue Ribbon Plumbing LLC
4201 Carolina Exchange Drive Suite 202
Myrtle Beach, SC 29579
(843) 267-9733
https://www.blueribbonplumbingmb.com/

Serving all of Horry County including Myrtle Beach, North Myrtle Beach, Little River, Murrells Inlet/Garden City, Surfside Beach, Carolina Forest/Forestbrook, Conway/Aynor

HOW TO HANDLE A PLUMBING EMERGENCY

If you are a homeowner, chances are you will need plumbing services at some point. But do you know what you need to do during a plumbing emergency? Listed below are a few tips to help you handle the situation and prevent any further damages to your property while waiting for a plumbing emergency contractor.

Shut It Off!

If you discover a plumbing concern or a leak, the first thing you need to do is turn off the water so you can stop further damage. Even the smallest leak can cost you thousands of dollars worth of structural damage if you ignore it. If the leak is found in the faucet, toilet, or other fixtures, be sure to shut off the water that runs to the fixture. In case you can’t locate the source of the water, or perhaps you’ve tried to shut it off but it still didn’t stop the water, your next course of action is to turn off the main water supply to your house and it is usually located close to your water meter.

Evaluate The Damage

Try to evaluate the extent of the damage before contacting a Myrtle Beach emergency plumber. Whatever information you’ll be able to give the plumber over the phone will provide him a good idea of what the problem is. It will also be easier for the plumber to fix the issue quickly and correctly.

Contact The Water Company

Never assume that you will be responsible for the repair without getting in touch with the water company. In case you have problems with the main sewer, the main water line, or a blocked sewer, the water company may be able to provide a plumber in Myrtle Beach who can assist you with your plumbing emergency.

Contact A Plumbing Emergency Contractor

It is crucial that you call a plumber that offers a 24-hour emergency plumbing service. Don’t forget to give the plumber as much information as you can regarding your plumbing emergency, the affected fixtures, the extent of the problem, and what you have done so far to address the issue.

You also have to ask the plumber how much he or she charges for the service call and how much will the plumbing repair cost. Keep in mind that not all plumbers can give a quote without seeing the actual problem. However, they may be able to provide you with a general idea of the likely costs associated with specific repairs.

Call Blue Ribbon Plumbing for all your emergency plumbing needs. Our team is ready to help 24/7.

Like our Facebook page for more great info about plumbing services.

Blue Ribbon Plumbing LLC
4201 Carolina Exchange Drive Suite 202
Myrtle Beach, SC 29579
(843) 267-9733
https://www.blueribbonplumbingmb.com/

Serving all of Horry County including Myrtle Beach, North Myrtle Beach, Little River, Murrells Inlet/Garden City, Surfside Beach, Carolina Forest/Forestbrook, Conway/Aynor